How a Slab Leak Repair Service Can Fix a Plumbing Problem

Slab leaks are by far among the most troubling problems for home owners, not only because they fail to present visible indications before it’s too late but also because they do not present any visible symptoms until they are too late. A poorly constructed slab leak is generally a problem that most Santa Ana, California homeowners can never foresee.

Slab Leak Repair

An improper installation of a drain line or a faulty pipe line can often lead to a slab leak. A faulty drain line can lead to the leak getting even worse and eventually cause a blockage. In such situations, an expert slab leak repair service must be called as soon as possible.

However, slab leaks often pose little if any danger. Most leaks in a slab are small and can easily be concealed by a homeowner or a building inspector. Moreover, many such leaks will not pose a danger for water damage unless a homeowner or an inspector is unaware of them. But a simple leak in a water pipe could cause a much bigger problem for a building than the presence of a simple leak.

Therefore, there are a number of ways to detect and avoid slab leaks. Homeowners should pay particular attention to the way drains are laid in a basement area.

Many homeowners may not have the knowledge to notice that a basement is being drained improperly, but it is important to avoid such a situation in the future by having a professional install a system for the drainage of water in the basement area. An automatic system would cost less in the long run than hiring a skilled plumber to make the necessary repairs. And the plumber will charge you more.

Most home owners often assume that the drain pipes installed in their homes are perfectly aligned with the drainage system. They also assume that the pipes are perfectly straight and not twisted or broken. However, such a situation can be a big problem when there is a slab leak.

There are a number of things that can cause a slab leak such as cracked pipes, a crooked drain line or a clogged drainage system. For example, a blocked drain line will result in a pool of water in your basement that can cause a great deal of inconvenience and risk of causing serious damage to your home.

A professional slab leak repair service can prevent any of these problems from occurring by doing a quick inspection of your house. The service will also advise you of possible ways of preventing these potential disasters.

If a slab leak is detected, the service will contact the manufacturer of your plumbing system and have the problem fixed. This type of repair is often times cheaper than having a professional plumber come out to do the repair.

If you suspect that your water leak may be due to a faulty drain, then it is advisable to hire a plumber to go out and check for yourself. However, it is always better to err on the side of caution and call your builder’s maintenance department first before calling a professional to determine the source of the leak.

Another way that a professional will check for a faulty drain line is to use a metal detector. After you hear the sound of metal, you need to listen to the water flow down the drain pipes. You will also want to have a professional inspect the outside walls of the basement to see if there is any debris blocking the drain lines. As you listen to the sound, you will see a metal sound that sounds like a ticking noise.

If the metal sound persists, then you should contact a professional who can then fix the drain line by drilling through the wall to clear the blockage. If the metal sound doesn’t persist, then the drain line can be repaired by a homeowner. In this case, you will want to have the drainage system replaced.

If you notice that your drain lines are clogged, but you don’t know how to find out how deep the clog is a slab leak repair service can help. By using a metal detector, you can check to see if a metal probe can be used to check the drain line.