How to Fix Refrigerator Door Handles Problems

If you find your Fix Refrigerator Door Handles constantly moving, you will need to make sure it is properly lubricated before the problem rears its head again. The reason for the door handle slipping up and down is usually grease buildup and dirt build up that needs to be cleaned and lubricated to keep it from happening again.

You should not attempt to clean out the door handle until you have thoroughly cleaned your refrigerator and all of the surrounding areas. Then you should lubricate the door handles to avoid moisture from building up around the area and causing damage to your doors. It is also a good idea to keep a small bottle of water handy to help keep you from getting overwhelmed when it comes to cleaning.

The first thing that you want to do is open the door handle up and clean the area behind it. Using a vacuum cleaner, remove any food remnants or debris that has built up inside. Rinse thoroughly with soapy water and make sure to rinse all the way down the door handle as well. This process will take quite a bit of time so if you do not have the time to complete this process yourself then you may want to call in a professional service to do it for you.

Next, you will want to carefully look at your door handles and make sure that there are no cracks or breaks. If you see any signs of damage then you will need to replace your door handles immediately. Also, you should check the seals on the door as this is one of the most common ways that a door can break. If you find any signs of rust then you should replace the seals as well.

After you have finished cleaning out the area around the door and replacing any seals that may be in need of repair, you will then want to ensure that the door is closed and set back on its hinges. With a hammer, you should gently tap the hinges into place. Once you have done this you should set the handle back to where it should be. You should make sure that the handle is completely centered once you are done. If it is not set properly then you will need to adjust it so that it is.

Finally, you should test your door by opening and closing it before replacing the door handle completely. If the door still does not close properly then you may want to have a professional come out and check it out to ensure that it is not something else that is causing the problem.